home Wood Based Panels MDF Moisture Resistance
Dongwha Moisture Resistance MDF is an ideal substrate for kitchen and bathroom cabinetry and any other areas where moisture and high humidity is present.
Its main characteristic produced from melamine resin system is an increased in dimensional stability or lower thickness swelling where there is the risk of occasional wetting or prolonged exposure to high levels of humidity. There is an option of having green dye added on to the board. This is upon request by customer.
<Physical & Mechanical Properties of Fibreboard>
Mechanical Properties |
Test Method |
Unit | ≥ 2.5 - 4.0 |
> 4.0 - 6.0 |
> 6.0 - 9.0 |
> 9.0 - 12.0 |
> 12.0 - 19.0 |
> 19.0 - 30.0 |
---|---|---|---|---|---|---|---|---|
Thickness tolerance | BS EN 324-1 |
mm | ±0.2 | |||||
Size tolerance (length & width) |
BS EN 324-1 |
mm | a) within 5mm (length) & within 2mm (width) for free trim panel b) +2 mm (width) and + 5mm (length) for nett size panel |
|||||
Squareness | BS EN 324-2 |
mm/m | <1.5 | |||||
Squareness (diagonal) |
BS EN 324-2 |
mm | < 5 | |||||
Average density | BS EN 323 |
kg/㎥ | 800-860 | 780-840 | 760-800 | 720-760 | 700-740 | 650-690 |
Board moisture | BS EN 322 |
% | 5-8 | |||||
Modulus of Rupture | BS EN 310 |
N/㎟ Ave |
27 | 27 | 27 | 26 | 24 | 22 |
Modulus of elasticity in bending |
BS EN 310 |
N/㎟ Ave |
NA | 2700 | 2700 | 2500 | 2400 | 2300 |
Internal bond (dry) | BS EN 319 |
N/㎟ Ave |
0.70 | 0.70 | 0.80 | 0.80 | 0.75 | 0.75 |
Screw holding Face | BS EN 320 |
N/㎟ Ave |
NA | NA | NA | NA | 1050 | 1000 |
Screw holding Edge | BS EN 320 |
N Ave |
NA | NA | NA | NA | 850 | 700 |
Thickness swelling (24hr) |
BS EN 317 |
% Max |
35 | 18 | 12 | 10 | 8 | 7 |
<Formaldehyde Emission of Fibreboard>
Properties | Test Method / Unit |
Classification | MDF | MDF LF |
MDF LG |
MDF MR |
MFB |
---|---|---|---|---|---|---|---|
Desiccators Method | JIS A 1460 mg/L |
F**** Ave ≤ 0.3 Max ≤0.4 |
|||||
F***(E0) Ave ≤ 0.5 Max ≤0.7 |
√ | √ | √ | √ | √ | ||
F** Ave ≤1.5. Max ≤2.1 |
√ | √ | √ | √ | √ | ||
CARB (Small Chamber Method) |
ASTM D 6007 ppm |
Phase 2 MDF Thin Board < 8mm < 0.13 |
√ | √ | √ | √ | √ |
Phase 2 MDF Thick Board > 8.1mm < 0.11 |
√ | √ | √ | √ | √ |
- NOTES :The perforator values in this table apply to panels with moisture contents of 6.5%