home Wood Based Panels MDF Latex Free
Dongwha Latex Free or mixed tropical hardwood MDF can be perfectly cut and edge-profiled. And due to the absence of rubber wood, the surface is free from latex spots. Aside from the smoothness of the surface, latex free surface provides an excellent base for numerous types of surface finishing such as spray painting, lacquering, veneering, paper laminating, etc.
<Physical & Mechanical Properties of Fibreboard>
Mechanical Properties |
Test Method |
Unit | ≥ 2.5 - 4.0 |
> 4.0 - 6.0 |
> 6.0 - 9.0 |
> 9.0 - 12.0 |
> 12.0 - 19.0 |
> 19.0 - 30.0 |
---|---|---|---|---|---|---|---|---|
Thickness tolerance | BS EN 324-1 |
mm | ±0.2 | |||||
Size tolerance (length & width) |
BS EN 324-1 |
mm | a) within 5mm (length) & within 2mm (width) for free trim panel b) +2 mm (width) and + 5mm (length) for nett size panel |
|||||
Squareness | BS EN 324-2 |
mm/m | <1.5 | |||||
Squareness (diagonal) |
BS EN 324-2 |
mm | < 5 | |||||
Average density | BS EN 323 |
kg/㎥ | 800-860 | 780-840 | 760-800 | 720-760 | 700-740 | 650-690 |
Board moisture | BS EN 322 |
% | 5-8 | |||||
Modulus of Rupture | BS EN 310 |
N/㎟ Ave |
23 | 23 | 23 | 22 | 20 | 18 |
Modulus of elasticity in bending |
BS EN 310 |
N/㎟ Ave |
NA | 2700 | 2700 | 2500 | 2200 | 2100 |
Internal bond (dry) | BS EN 319 |
N/㎟ Ave |
0.65 | 0.65 | 0.65 | 0.60 | 0.55 | 0.55 |
Screw holding Face | BS EN 320 |
N/㎟ Ave |
NA | NA | NA | NA | 1050 | 1000 |
Screw holding Edge | BS EN 320 |
N Ave |
NA | NA | NA | NA | 850 | 700 |
Thickness swelling (24hr) |
BS EN 317 |
% Max |
35 | 30 | 17 | 15 | 12 | 10 |
<Formaldehyde Emission of Fibreboard>
Properties | Test Method / Unit |
Classification | MDF | MDF LF |
MDF LG |
MDF MR |
MFB |
---|---|---|---|---|---|---|---|
Desiccators Method | JIS A 1460 mg/L |
F**** Ave ≤ 0.3 Max ≤0.4 |
|||||
F***(E0) Ave ≤ 0.5 Max ≤0.7 |
√ | √ | √ | √ | √ | ||
F** Ave ≤1.5. Max ≤2.1 |
√ | √ | √ | √ | √ | ||
CARB (Small Chamber Method) |
ASTM D 6007 ppm |
Phase 2 MDF Thin Board < 8mm < 0.13 |
√ | √ | √ | √ | √ |
Phase 2 MDF Thick Board > 8.1mm < 0.11 |
√ | √ | √ | √ | √ |
- NOTES :The perforator values in this table apply to panels with moisture contents of 6.5%